• � CE approved to 61347-2-13 which all LED drivers must meet come July 1st 2009.
• � Available stock from May 2009 - please contact IST for more information.
• IST has globally patented the technicque of Pulse Amplitude Modulation. This technique does not use Pulse Width Modulation to change the intensity of the LEDs in any of their LED driver solutions aand offers the iDrive range royalty free.

Electrical Specification tbc

Input Voltage Range: 100 - 240V AC
Input Frequency: 50 - 60 Hz
Consumption: 8 – 65 Watts
Power Factor: 0.88
Efficiency: 85%
Connection: Standard IEC
Insulation Class: 1

Output
Output Power: 16.8 Watts per channel
Output Current: 350mA per channel
Voltage: 14 - 42V DC per channel
LED Connection: 10 - Pin terminal block connector

Control Input
Dimming control: DMX-512A
Connection: 5 - Pin XLR
Dimming Range: 0 - 100%
DMX Address Range: 001 - 510 via LED display
Programs: See user manual for all pre-sets

Mechanical
Mounting: Four 3mm holes for fixing
Construction: Aluminum casing for improved thermal dissipation

Environmental
Operating Ambient Temperature: -20ºC to + 50ºC
Storage Ambient Temperature: -20ºC to + 70ºC
Case Temperature: + 65ºC
Relative Humidity: 80%
Lifetime (failure after 50,000 hours): 5%
Lifetime (failures after 50,000 hours): 5%

Dimensions: 205 x 155 x 70 mm
Weight: 800 gramms