Constant current DALI/DSI & DMX/RDM LED driver
4 high resolution 16-bit channels
Wide DC voltage input range: 10.5-50V / 25-65V
Up to 1.6A per channel
|Compact PCB or chassis mounted|
The iDrive® Quattro-CCL is a highly integrated, compact 4 channel driver for high power lighting applications and comes as a PCB or chassis-mounted.
The Quattro-CCL offers a multitude of network control protocols, including DALI/DSI & DMX/RDM and incorporates iDrive®’s advanced dynamic power control system to deliver up to 98% efficient LED output stages.
Incorporating four independent LED constant current sources, the iDrive® Quattro caters to the needs of numerous SSL applications, including retail, architectural, commercial and signage.
The Quattro-CCL 4 channel driver is the ideal choice for controlling 4 independent channels between 0 and 1600mA per channel. Operating with a wide input supply voltage range of 10.5-50V DC, each channel can control from 1 to 16 LEDs on each output. The high voltage options allow the system to operate from a DC input voltage between 25V to 65V to control between 1 and 21 LEDs.
Utilising high current input & output easy-fit plug connectors enables the Quattro-CCL to be easily integrated into lighting systems. The Quattro series allows daisy-chaining of SSL fixtures and can broadcast running show sequences to all connected Quattro-CCL units.
Full protection is offered with short circuit, reverse polarity, over temperature, over voltage, over current, over power and open circuit.
Input Voltage Range: 10.5 - 50V DC only
Connection: 2-pole, 5mm pitch screw terminals
Output power: 0-77W per channel maximum
Output Current: 100 to 1600mA per channel
Output Voltage: <1V to input voltage -2V or 48V max
LED Connection: 8pin terminal connector
Current Resolution: 8-bit, 16-bit & Master Dim
Channel Bonding: Common anode + bonding compatible
Dimming Control: DMX-512A, RDM, DALI, DSI
Connection: DALI/DSI (2pin, 3.5mm pitch screw terminal); DMX/RDM (3pin, 3.5mm pitch screw terminal)
DMX Range: 0.01-512 via DIP switch
|Current Range: 100 to 1600mA (A settings) via 3-way DIP switch|
Programmes: See User Manual for all pre-sets
RDM: Full control over functions and sensors
Mounting: 4x 4.5mm holes for mounting
Operating Ambient Temperature: -10°C to +40°C
Storage Ambient Temperature: -20°C to +70°C
146 x 75 x 33mm (max.): 255g metal chassis version
146 x 69 x 25mm (max.): 110g PCB version