70W single output CC & CV LED driver
Universal AC voltage input: 100V to 240V AC
High efficiency (90% typical) two stage design
Built-in active PFC (up to 0.99 typical @ full load)
Short circuit, over voltage, over power and temperature protection
Standard & 1-10V dimmable models
The new iDrive® Solo™70 provides a compact, high efficiency range of constant voltage and constant current LED drivers for indoor
and outdoor applications suitable for LED lighting and signage. The 70W iDrive® Solo™ is available in a compact U-Shaped open frame
or black anodised aluminium IP65 rated chassis enabling the system to be used in a wide variety of applications.
Incorporating the latestactive PFC design the Solo™ 70 is able to combine high efficiency with high PFC over a wide range of AC voltage
inputs from 100V to240V AC. The iDrive® Solo™ is approved to CE 61347-2-13 for use in Europe markets.
Input Voltage Range: 100 - 240V AC
Input Frequency: 47 - 63 Hz
Input Current: 0.9A max.
Efficiency: >85% at full load
Total Harmonic Distortion: 20% max.
|Power Factor: up to 0.99 max.|
Standby Power: <1 watts="" total="" p="">
Insulation Class: 1
Max Peak Inrush @ 240V: + 100.5A / - 103.7A
Start up time: 4.8 seconds
Output Power: 70W max.
Output Current: 2900 or 5600 mA
Output Voltage: 12 or 24V DC
Line regulation: 1%
Load regulation: 5%
|Constant Current Regulation: 5%|
Ripple and Noise V: 1% constant voltage; 5% (max.) constant current
Hold-Up Time: 10mS min. at full load 115V AC input
|Dimensions: See datasheet|
Weight: See datasheet
Construction: U-frame and IP65 aluminium chassis
Operating Ambient Temperature: -20ºC to + 50ºC
Storage Ambient Temperature: -20ºC to + 85ºC
Over Voltage Protection: Auto recovery
|Short Circuit Protection: Built-in|
|Over Power Protection: Built-in|
|Over Temperature Protection: 125 degress, latch|